HAIR SMOOTHING SYSTEM KIT
HOT TO USE IT

PREPARATION

Gently cleanse the hair with the PREPARATORY SHAMPOO to eliminate any oily or silicone residues in the hair as they act as a barrier on the hair. Rinse the hair, then repeat the process. After cleansing the hair the second time, leave the product on for 5 minutes, then rinse. Towel dry, then blow dry the hair to 90%, making the hair as smooth as possible and avoid giving volume.

APPLICATION

Wear gloves, divide hair into sections and pour the WHITE SMOOTHING CREAM or the VIOLET SMOOTHING CREAM or a mixture of the two into the non-metallic bowl.

WHITE SMOOTHING CREAM: formulated for natural/strong hair with tone levels from 1-10.

VIOLET SMOOTHING CREAM: formulated for coloured/chemically treated hair (bleached, permed, etc.) with tone levels from 1-5.

WHITE SMOOTHING CREAM + VIOLET SMOOTHING CREAM: formulated for all hair types to obtain a cool reflection. For tone levels of 6 and above. Use a 1:1 mixing ratio.

Amount of product WHITE/ VIOLET SMOOTHING CREAM: short hair 30 g / medium hair 50 g / long hair 75 g.
Use a brush to apply the product on 2-3 cm wide hair locks, distribute the product evenly along the lengths using a fine tooth comb then gently massage the hair locks. When the application process is complete, cover the hair with a processing cap.

NATURAL WHITE HAIR: 30 minutes (the processing cap should only be worn for the first 5 minutes of the application time).

DECOLOURED/SENSITIZED HAIR: 35/40 minutes (the processing cap should only be worn for the first 5 minutes of the application time).

COLOURED/CHEMICALLY TREATED HAIR: 35/45 minutes (the processing cap should be worn for the entire application time).

NATURAL/FINE HAIR: 45/50 minutes (the processing cap should be worn for the entire application time).

AFRO/CURLY HAIR: 45/60 minutes (the processing cap should be worn for the entire application time).

Rinse thoroughly and towel dry hair to remove excess water.

RESULTS

Comb the hair thoroughly, proceed by drying with a brush and hair dryer at moderate heat. When you have finished, smooth a flat iron through 2-3 cm wide hair locks.Adjust the temperature of the flat iron according to the hair type:

NATURAL WHITE HAIR: maximum temperature of the flat iron 190°C (375 °F). It is advisable only to use a hair dryer and ceramic or thermal brush and pass the flat iron over the hair locks only 3 times.

DECOLOURED/SENSITIZED HAIR: maximum temperature of the flat iron 190°C (375°F); pass over the hair locks 7/8 times, depending on the condition of the hair.

COLOURED/TREATED HAIR: maximum temperature of the flat iron 210°C (410°F); pass over the hair locks 8/10 times, depending on the condition of the hair.

NATURAL HAIR/FINE HAIR – AFRO/CURLY HAIR: maximum temperature of the flat iron 230°C (450°F); pass over the hair locks 12 or more times, depending on the condition of the hair.

After straightening, leave the hair to cool for 3 minutes.

Wash hair with the NUTRIENT SHAMPOO, then apply the NUTRIENT CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired styling.

Dry the hair with a ceramic brush, smoothing the hair as much as possible using a hair dryer, without working too much on the same strand.

Wash the hair with the NOURISHING SHAMPOO, then apply the NOURISHING CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired hair style, using a hair dryer and diffuser.

Dry the hair with a ceramic brush, smoothing the hair as much as possible using the hair dryer without working too much on the same strand.

If you want to open up the curl, use a flat iron at 190°C (375°F) and pass over the large, thick hair locks 2-3 times.

Wash the hair with the NUTRIENT SHAMPOO, then apply the NUTRIENT CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired hair style, using a hair dryer and diffuser.

Proceed by drying the hair with a ceramic brush, smoothing the hair as much as possible using the hair dryer, without over working on the same strands.

Pass the flat iron at 210°C (410°F) on large, thick locks as many times as necessary to reduce the volume of the hair.

Wash the hair with the NUTRIENT SHAMPOO, then apply the NUTRIENT CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired hair style.

WANT TO KNOW MORE?

LUXURY HAIR PRO

BEAUTY SERVICE S.R.L. a socio unico
Via Romolo Gessi 16
25135 BRESCIA - ITALY
Tel. 030.7833015

© 2021 BEAUTY SERVICE - P.IVA 00918730177

HAIR SMOOTHING SYSTEM KIT
HOT TO USE IT

PREPARATION

Gently cleanse the hair with the PREPARATORY SHAMPOO to eliminate any oily or silicone residues in the hair as they act as a barrier on the hair. Rinse the hair, then repeat the process. After cleansing the hair the second time, leave the product on for 5 minutes, then rinse. Towel dry, then blow dry the hair to 90%, making the hair as smooth as possible and avoid giving volume.

APPLICATION

Wear gloves, divide hair into sections and pour the WHITE SMOOTHING CREAM or the VIOLET SMOOTHING CREAM or a mixture of the two into the non-metallic bowl.

WHITE SMOOTHING CREAM: formulated for natural/strong hair with tone levels from 1-10.

VIOLET SMOOTHING CREAM: formulated for coloured/chemically treated hair (bleached, permed, etc.) with tone levels from 1-5.

WHITE SMOOTHING CREAM + VIOLET SMOOTHING CREAM: formulated for all hair types to obtain a cool reflection. For tone levels of 6 and above. Use a 1:1 mixing ratio.

Amount of product WHITE/ VIOLET SMOOTHING CREAM: short hair 30 g / medium hair 50 g / long hair 75 g.
Use a brush to apply the product on 2-3 cm wide hair locks, distribute the product evenly along the lengths using a fine tooth comb then gently massage the hair locks. When the application process is complete, cover the hair with a processing cap.

NATURAL WHITE HAIR: 30 minutes (the processing cap should only be worn for the first 5 minutes of the application time).

DECOLOURED/SENSITIZED HAIR: 35/40 minutes (the processing cap should only be worn for the first 5 minutes of the application time).

COLOURED/CHEMICALLY TREATED HAIR: 35/45 minutes (the processing cap should be worn for the entire application time).

NATURAL/FINE HAIR: 45/50 minutes (the processing cap should be worn for the entire application time).

AFRO/CURLY HAIR: 45/60 minutes (the processing cap should be worn for the entire application time).

Rinse thoroughly and towel dry hair to remove excess water.

RESULTS

Comb the hair thoroughly, proceed by drying with a brush and hair dryer at moderate heat. When you have finished, smooth a flat iron through 2-3 cm wide hair locks.Adjust the temperature of the flat iron according to the hair type:

NATURAL WHITE HAIR: maximum temperature of the flat iron 190°C (375 °F). It is advisable only to use a hair dryer and ceramic or thermal brush and pass the flat iron over the hair locks only 3 times.

DECOLOURED/SENSITIZED HAIR: maximum temperature of the flat iron 190°C (375°F); pass over the hair locks 7/8 times, depending on the condition of the hair.

COLOURED/TREATED HAIR: maximum temperature of the flat iron 210°C (410°F); pass over the hair locks 8/10 times, depending on the condition of the hair.

NATURAL HAIR/FINE HAIR – AFRO/CURLY HAIR: maximum temperature of the flat iron 230°C (450°F); pass over the hair locks 12 or more times, depending on the condition of the hair.

After straightening, leave the hair to cool for 3 minutes.

Wash hair with the NUTRIENT SHAMPOO, then apply the NUTRIENT CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired styling.

Dry the hair with a ceramic brush, smoothing the hair as much as possible using a hair dryer, without working too much on the same strand.

Wash the hair with the NOURISHING SHAMPOO, then apply the NOURISHING CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired hair style, using a hair dryer and diffuser.

Dry the hair with a ceramic brush, smoothing the hair as much as possible using the hair dryer without working too much on the same strand.

If you want to open up the curl, use a flat iron at 190°C (375°F) and pass over the large, thick hair locks 2-3 times.

Wash the hair with the NUTRIENT SHAMPOO, then apply the NUTRIENT CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired hair style, using a hair dryer and diffuser.

Proceed by drying the hair with a ceramic brush, smoothing the hair as much as possible using the hair dryer, without over working on the same strands.

Pass the flat iron at 210°C (410°F) on large, thick locks as many times as necessary to reduce the volume of the hair.

Wash the hair with the NUTRIENT SHAMPOO, then apply the NUTRIENT CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired hair style.

WANTO TO KNOW MORE?

LUXURY HAIR PRO

BEAUTY SERVICE S.R.L. a socio unico
Via Romolo Gessi 16
25135 BRESCIA - ITALY
Tel. 030.7833015

© 2021 BEAUTY SERVICE - P.IVA 00918730177

HAIR SMOOTHING
SYSTEM KIT
HOT TO USE IT

PREPARATION

Gently cleanse the hair with the PREPARATORY SHAMPOO to eliminate any oily or silicone residues in the hair as they act as a barrier on the hair. Rinse the hair, then repeat the process. After cleansing the hair the second time, leave the product on for 5 minutes, then rinse. Towel dry, then blow dry the hair to 90%, making the hair as smooth as possible and avoid giving volume.

APPLICATION

Wear gloves, divide hair into sections and pour the WHITE SMOOTHING CREAM or the VIOLET SMOOTHING CREAM or a mixture of the two into the non-metallic bowl.

WHITE SMOOTHING CREAM: formulated for natural/strong hair with tone levels from 1-10.

VIOLET SMOOTHING CREAM: formulated for coloured/chemically treated hair (bleached, permed, etc.) with tone levels from 1-5.

WHITE SMOOTHING CREAM + VIOLET SMOOTHING CREAM: formulated for all hair types to obtain a cool reflection. For tone levels of 6 and above. Use a 1:1 mixing ratio.

Amount of product WHITE/ VIOLET SMOOTHING CREAM: short hair 30 g / medium hair 50 g / long hair 75 g.
Use a brush to apply the product on 2-3 cm wide hair locks, distribute the product evenly along the lengths using a fine tooth comb then gently massage the hair locks. When the application process is complete, cover the hair with a processing cap.

NATURAL WHITE HAIR: 30 minutes (the processing cap should only be worn for the first 5 minutes of the application time).

DECOLOURED/SENSITIZED HAIR: 35/40 minutes (the processing cap should only be worn for the first 5 minutes of the application time).

COLOURED/CHEMICALLY TREATED HAIR: 35/45 minutes (the processing cap should be worn for the entire application time).

NATURAL/FINE HAIR: 45/50 minutes (the processing cap should be worn for the entire application time).

AFRO/CURLY HAIR: 45/60 minutes (the processing cap should be worn for the entire application time).

Rinse thoroughly and towel dry hair to remove excess water.

RESULTS

Comb the hair thoroughly, proceed by drying with a brush and hair dryer at moderate heat. When you have finished, smooth a flat iron through 2-3 cm wide hair locks.Adjust the temperature of the flat iron according to the hair type:

NATURAL WHITE HAIR: maximum temperature of the flat iron 190°C (375 °F). It is advisable only to use a hair dryer and ceramic or thermal brush and pass the flat iron over the hair locks only 3 times.

DECOLOURED/SENSITIZED HAIR: maximum temperature of the flat iron 190°C (375°F); pass over the hair locks 7/8 times, depending on the condition of the hair.

COLOURED/TREATED HAIR: maximum temperature of the flat iron 210°C (410°F); pass over the hair locks 8/10 times, depending on the condition of the hair.

NATURAL HAIR/FINE HAIR – AFRO/CURLY HAIR: maximum temperature of the flat iron 230°C (450°F); pass over the hair locks 12 or more times, depending on the condition of the hair.

After straightening, leave the hair to cool for 3 minutes.

Wash hair with the NUTRIENT SHAMPOO, then apply the NUTRIENT CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired styling.

Dry the hair with a ceramic brush, smoothing the hair as much as possible using a hair dryer, without working too much on the same strand.

Wash the hair with the NOURISHING SHAMPOO, then apply the NOURISHING CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired hair style, using a hair dryer and diffuser.

Dry the hair with a ceramic brush, smoothing the hair as much as possible using the hair dryer without working too much on the same strand.

If you want to open up the curl, use a flat iron at 190°C (375°F) and pass over the large, thick hair locks 2-3 times.

Wash the hair with the NUTRIENT SHAMPOO, then apply the NUTRIENT CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired hair style, using a hair dryer and diffuser.

Proceed by drying the hair with a ceramic brush, smoothing the hair as much as possible using the hair dryer, without over working on the same strands.

Pass the flat iron at 210°C (410°F) on large, thick locks as many times as necessary to reduce the volume of the hair.

Wash the hair with the NUTRIENT SHAMPOO, then apply the NUTRIENT CONDITIONER and leave it for 10 minutes, then rinse. Proceed with the desired hair style.

WANT TO KNOW MORE?

LUXURY HAIR PRO

BEAUTY SERVICE S.R.L. a socio unico
Via Romolo Gessi 16
25135 BRESCIA - ITALY
Tel. 030.7833015

© 2021 BEAUTY SERVICE - P.IVA 00918730177